ACCESSORIES

PART NUMBER

FM123

Solar Panel Kit  (5 Watt or 10 Watt)

The Solar Panel is a 5 watt solar powered battery charger for use with the FM350 and FM500/FM502 Mighty Mule® gate opener systems. Particularly suited for remote installations, each Solar Panel comes with tubular steel support, mounting clips, wire connectors, and 8 ft. of low voltage wire. For additional wire, see Low Voltage Wire (RB509). The Mighty Mule® FM350 and FM500/502 control boards have clearly labeled terminal connections for easy installation of the Solar Panel. Installation in some regions of the world will require multiple solar panels for adequate charging power.

Dual gate openers require 10 watt or (2) 5 watt panels

These two (2) low voltage lights are powered by your existing Mighty Mule® gate opener batteries. Enhance the look of your gate and increase security at night as you enter and exit your property. Lights remain lit at night for up to 120 seconds. Lights can be front column mounted or top post mounted.

Low voltage wire (RB509) is required to connect lights to control board/box.

The driveway alert contains:  Installation hardware, stake, outdoor driveway transmitter and transformer for indoor receiver/announcer.

The Pin Lock substitutes for the clevis pin at either or both mounting points of the opener. Helps prevent theft of the opener from the gate, while allowing quick release of the opener. Suitable for use on either or both ends of the (FM500, FM502) and the front mounting end of the (FM350).

The Mighty Mule entry transmitter includes a visor clip and has adjustable code settings. This is the standard transmitter that is included in every Mighty Mule® gate opener kit.

Dual Button Key Chain Transmitter (FM134)
This transmitter is the same as the Mighty Mule® entry transmitter with the addition of a key chain and a second button. Both buttons are programmable to control multiple gate openers on different gates and/or garage door openers (requires garage door receiver RB709).

The triple button transmitter has adjustable code settings for your security and convenience and is like the standard entry transmitter (FM135) with the added feature of two more programmable buttons for two gates or with the optional universal garage door receiver  (RB709), can activate multiple gates and a garage door as well.

Compatible with all Mighty Mule® gate opener systems.

This Garage door receiver can be programmed to allow you to use either the RB742 (Dual Button) or RB743 (Triple Button) transmitters to open your garage door and gate opener(s). The Garage Door Receiver is compatible with most garage door openers. 

Intercom / Keypad 
NEW - Multi-Base Compatible (Now operates with up to 4 indoor base stations - Part number F3101MBC)

Now add up to 4 This versatile digital intercom with keypad system is ideal for any residential application, alerting you of visitors and allowing gate opener activation from the safety of your home. It can be programmed to use up to 25 different personal identification number (PIN) codes. The intercom provides superior range with crystal clear two-way communication up to 500 feet wireless or 1,000 feet wired. (Kit includes one base station with rechargeable battery)

Add-on interior intercom base system with transformer for FM136 Multi-Base Compatible Intercom/Keypad (maximum 4 indoor base stations)

** Only operates with "Wireless" Applications

The Digital Keypad is a specially designed digital keypad can be easily installed as a wireless or wired keypad. It can be programmed to use up to 25 different personal identification number (PIN) codes. Each code is face programmable with additional security features built in. Requires 3 AA batteries (not included). Wired installations require 16 gauge, low voltage, multi-stranded, dual conductor, direct burial wire (RB509 sold separately). 

In ground burial post for easy installation of your keypad.  Universal face plate allows for custom installation.  Rust proof extruded aluminum construction with black anodized finish.  65-inch allows for 45-inch finished height. 

NEWmodular tube design.  Now UPS shippable.

Automatically activates gate opener "Hands-Dree" when a vehicle exits the property.  Easy Installation, no trenching required.

Kit includes a wireless sensor want with a plug-in electronic transmitter module.  Transmitter has 15 foot tether designed for mounting away from driveway edge.  Two channel receiver and two AA batteries are also included.  The range between transmitter and receiver is up to 100 feet.

The Gate Opening Sensor is an electromagnetic sensor, which offers 'hands free' operation of most Mighty Mule® Automatic Gate Opener with a 12 ft radius of detection of vehicles in motion. The sensitivity of the wand is adjustable for individual requirements.  Includes 50ft cable

OPTIONAL CABLE LENGTHS:

For sooner gate opening choose the FM140 with a 100ft  cable or the FM141 with a 150ft cable.

The Automatic Gate Lock Pull-to-Open is a MUST for added security. Solenoid driven, plated steel bolt lock with a zinc plated steel housing. Unlocks and locks automatically as gates open and close. Used with the Mighty Mule® system for maximum stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for animal enclosures or high wind areas.

Column Mount Lock Receiver (433IH)

Required for mounting the Automatic Gate Lock on brick columns, walls, or for applications with limited space between gate and post. Can be used with the Bulldog Pedestrian Gate Lock as well.

Similar to the Automatic Gate Lock but designed for horizontal use only on walk-through gates without automatic openers. Complete with its own control box, battery, push-button, keyed manual release for emergencies and installation manual. This is an affordable solution to protecting swimming pool areas, playgrounds, tennis courts, boat docks and other secured areas from unwanted access.

The GTO/PRO Safety Beams are used as a primary safety device in providing a "non-contact" means of entrapment protection.  Consult your GTO/PRO Gate Operator system for further information regarding placement and requirements of safety devices. R4222 Spec Sheet

This is required when Mighty Mule® gate opener(s) must push the gate open, such as on a sloping driveway or where space prevents the gate(s) from opening inward (pull to open). Two PTO brackets are required for conversion of a dual swing gate installation.

This is required when Mighty Mule® gate opener(s) must push the gate open, such as on a sloping driveway or where space prevents the gate(s) from opening inward (pull to open). Two PTO brackets are required for conversion of a dual swing gate installation.

This is the standard replacement battery for the Mighty Mule Gate Opener. It is a 12 volt, 7.0 amp-hour, maintenance-free battery for the Mighty Mule® gate opener systems. Life expectancy is 3-5 years.

This is the standard replacement battery for the Mighty Mule 250 Gate Opener. It is a 12 volt, 7.0 amp-hour , maintenance-free battery. Life expectancy is 3-5 years.

Gate Opener Battery Heater Kit

The Battery Heater helps keep gate opener batteries warm in cold climates. This heater is recommended where outside temperatures stay below 32 degrees F for an extended period of time. The Battery Warmer is very safe and easy to install, and it wires into the gate opener circuit board to maintain a constant temperature. It attaches directly to the gate opener's 12 Volt battery, and will prevent the battery from losing its charge in cold temperatures, not solar compatible.

The 16 gauge, multi-stranded, dual conductor Low Voltage Wire is for connecting the AC powered transformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads and other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. Available in 1000 foot rolls or special lengths.

   LOW VOLTAGE WIRE

The 16 gauge, multi-stranded, dual conductor Low Voltage Wire is for connecting the AC powered transformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads and other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. Available in 1000 foot rolls or special lengths.